Dependent value: m
Dependent value: m
arcoPlus®684-6104-6124 are three modular systems consisting of 4-wall co-extruded multiwall polycarbonate panels with a thickness of 8-10 or 12mm, snap-fitted onto aluminium profiles, used for vertical windows, roofs (min. slope 5%) and curved roofs (minimum radius 2.0m with profiles cod.4248 and 4249; minimum radius 3.0m with aluminium rib profile cod.4636).
| Structure | 4 walls |
|---|---|
| Panel length | without limits |
| Available colors | Standard + Caleido + RTG |
| Usable module width | 600mm |
| Thickness | 8 - 10 - 12mm |
| Thermal transmittance U | 3,0 - 2,7- 2,5 W/m2K |
| Sound insulation Rw (ISO 717-1) | 18 dB (sp.8-10mm) |
| Sound insulation Rw (ISO 717-1) | 19dB (sp.12mm) |
| Linear thermal expansion | 0,065mm/m°C |
|---|---|
| Operating temperature | -40°C +120 °C |
| UV protection | Co-extrusion |
| Reaction to fire EN 13501-1 | EuroClass B-s1,d0 |
| MIN slope | 5% |
| Minimum bending radius | 2,0m (con profili cod.4248 e 4249) |
| Minimum bending radius | 3,0m (con profilo cod.4636) |
| Light transmission (τv) (684) | Clear 70% |
| Light transmission (τv) (6104) | Clear 70% |
| Light transmission (τv) (6124) | Clear 68% |
| Self-supporting structure | |
| Ease and cost-effective installation | |
| Thermal insulation | |
| Light transmission | |
| Resistance to UV radiation and hail |
The load resistance of the system depends on the type of joint profile used to join the panels and on the application conditions.
The system's flow rate values differ depending on the type of application. Click on the following icons to see the centre-to-centre distances required based on the permissible load.
I sistemi arcoPlus®684|6104|6124 possono essere utilizzati per pareti verticali e coperture piane o curve. L’inserimento a scatto su profili tubolari metallici con giunto aperto conferisce al sistema la necessaria resistenza alla spinta del vento ed al carico neve (vedi tabelle di carico). Il disegno a 4 pareti con incastro a scatto su tubolare con giunto aperto, conferisce al pannello una notevole resistenza alla flessione, e consente di ottenere tamponamenti verticali, coperture autoportanti di notevoli dimensioni con un ridotto utilizzo di profili rompitratta.
Detail of placing roofing elements into lateral containment profiles
Assembly of end profiles to customize installation width (684)
Detail of lower bearing for vertical infill with profile 4140, gasket and end cap (684)
Assembly of lateral starting profile 2147 or 2245 to position the first panel of the installation (684)
Detail of positioning aluminum sleeve 4260 to fix joint profile 4243 to the substructure (684)
Assembly detail of upper profile 4045 with gasket and end cap for vertical infills (2) (684)
.jpg)
