Dependent value: m
Dependent value: m
The arcoPlus®DBconnect system has been designed to create high-performance vertical translucent applications; it can be made up of different types of arcoPlus® panels according to the intended use (although it is mainly promoted in 4 standard configurations) using two arcoPlus® panels joined together thanks to a special joint profile, in order to obtain a double or triple wall with one or two internal cavities. Also thanks to the multiwall structure, arcoPlus®DBconnect is the ideal solution for the creation of translucent vertical walls that offer excellent benefits in terms of thermal insulation. The joint profile has been designed in two versions, polycarbonate or aluminium, in order to meet customised requirements regarding light transmission or load resistance. In addition to this, thanks to the non-through fastening methods used, the panels do not need to be drilled, offering both aesthetic and functional advantages, such as the free expansion of the panels.
| ArcoPlus® panel | 626 |
|---|---|
| Thickness (mm) panel | 20 |
| Thickness (mm) system | 90 |
| Width modulo (mm) | 600 |
| Structure (wall) | 6 |
| Thermal transmittance U *con PoliCarb 8mm | 0.62 |
| Isolamento acustico * con PoliComp 10mm | 26 |
| Light Transmission * crystal | 39 |
| Linear thermal expansion | 0,065mm/m°C |
|---|---|
| Operating temperature | -40°C +120 °C |
| Reaction to fire EN 13501-1 | EuroClass B-s1,d0 |
| Minimum bending radius | Not bendable |
| UV protection | Co-extrusion on both sides |
| MIN slope | Please contact the Technical Department |
| Ease and cost-effective installation | |
| Thermal insulation | |
| Light transmission | |
| High load resistance | |
| Resistance to UV radiation and hail | |
| Design aesthetics |
The load resistance of the system depends on the type of joint profile used to join the panels and on the application conditions.
The system's flow rate values differ depending on the type of application. Click on the following icons to see the centre-to-centre distances required based on the permissible load.
