Dependent value: m
Dependent value: m
arcoPlus®684-6104-6124 reversò are three modular systems consisting of 4-wall multiwall polycarbonate panels, with double UV protection, with a thickness of 8-10-12mm, anchored to existing structures using special brackets. The panels are made integral with each other by means of a protected polycarbonate joint cover profile, which can be snapped on, which guarantees perfect water tightness. Min. slope 5% for flat roofs and min. bending radius of 2.0m for curved roofs with profiles cod.4248 and 4249 and min. radius 3.0m with aluminium rib profile cod.4636
| Structure | 4 walls |
|---|---|
| Panel length | without limits |
| Available colors | Standard + Caleido + RTG |
| Usable module width | 600mm |
| Sound insulation Rw (ISO 717-1) | 18 dB (sp.8-10mm) |
| Sound insulation Rw (ISO 717-1) | 19dB (sp.12mm) |
| Thickness | 8-10-12mm |
| Thermal transmittance U | 3,0 - 2,7- 2,5 W/m2K |
| Linear thermal expansion | 0,065mm/m°C |
|---|---|
| Operating temperature | -40°C +120 °C |
| Reaction to fire EN 13501-1 | EuroClass B-s1,d0 |
| UV protection | Co-extrusion on both sides |
| MIN slope | 5% |
| Minimum bending radius | 2,0m (con profili cod.4248 e 4249) |
| Minimum bending radius | 3,0m (con profilo cod.4636) |
| Light transmission (τv) (684) | Clear 70% |
| Light transmission (τv) (6104) | Clear 70% |
| Light transmission (τv) (6124) | Clear 68% |
| Ease and cost-effective installation | |
| Thermal insulation | |
| Light transmission | |
| Resistance to UV radiation and hail | |
| Bendability with minimum radius of 2 m |
The load resistance of the system depends on the type of joint profile used to join the panels and on the application conditions.
The system's flow rate values differ depending on the type of application. Click on the following icons to see the centre-to-centre distances required based on the permissible load.
Joint using aluminum connector 4310 with screw tightening and closure with PE end cap, also positioning the plug to seal the cells
Positioning the end profile using the polycarbonate cover-joint
Assembly of the complete starting set with end cap, plate, plug and cover-joint
Positioning the aluminum sleeve 4319-200 to join multiple connector profiles code 4310 in series
Positioning the starting profile using the polycarbonate cover-joint
Translucent roofing with polycarbonate cover-joint 2146
