arcoPlus® 1000

arcoPlus1000® is a modular corrugated system consisting of 3-wall co-extruded multiwall polycarbonate panels, with variable thickness 8-12mm, perfectly overlapping longitudinally and allowing to obtain both continuous roofs and ridge-eaves skylights. Maximum usable length 5,000mm

8÷12mm÷mm

Applications of Overlapping Sistems arcoPlus® 1000

Continuous roofing systems

Skylights

Production standards

Sound insulation Rw (ISO 717-1)	16dB
Structure	3 walls
Thermal transmittance U	2,7 W/m²K
Thickness	variable from 8÷12mm
Greek height	80mm
Usable module width	990 ± 5mm
Available colors	Cristallo/Opale
Panel length	5,000mm (max recommended)

Features

Linear thermal expansion	0,065mm/m°C
Operating temperature	-40°C +120 °C
UV protection	Co-extrusion
Reaction to fire EN 13501-1	EuroClass B-s1,d0
Light transmission (τv)	Clear 70%
Bending radius	3,3m - 6,0mm
MIN slope (lucernario)	5%
MIN slope (copertura continua)	7%

Strengths

	Thermal insulation
	Light transmission
	High load resistance
	Resistance to UV radiation and hail
	Transversal overlap
	Longitudinal overlap
	Thermally welded panels

Special treatments

Flow rate tables

The system's flow rate values differ depending on the type of application. Click on the following icons to see the centre-to-centre distances required based on the permissible load.

Permissible loads fot flat installation on multiple supports (arcoPlus 1000) - roof

Permissible loads for curved installation on 2 supports (arcoPlus SUPER1000) - roof

Permissible loads fot flat installation on multiple supports (arcoPlus 1000) - skylight

Permissible loads for curved installation on 2 supports (arcoPlus 1000) - skylight

Move the cursors to set sheet measures

Lenght:

Dependent value: – m

Width:

Dependent value: – m

FLAT RIDGE-EAVES SKYLIGHT

Panels laterally overlapping on insulated greca square wave corrugated metal panels for roofing. The special design of the profile makes the system perfectly overlappable on all the main types of panel. Minimum slope 5%.

FLAT CONTINUOUS ROOFING

Creation of continuous roofing/wall, obtained by means of the continuous lateral overlapping of polycarbonate panels. Please note: on the roof, the recommended minimum slope is 7%.

arcoPlus®1000

Detail on the fastening of the panels to the substructure with screws and caps in continuous roofing

Fastening of the roofing foot with Vipla screws of a ridge-eaves skylight created by means of lateral overlapping

Translucent continuous roofing with arcoPlus1000 with heat-sealed ends

Detail of the ridge for ridge-eaves skylights interspersed with insulating or metal panels

Detail of central gutter_ single panel skylight application with lateral overlap on the insulating roofing panels

CURVED RIDGE-EAVES SKYLIGHT - arcoPlus®1000 curvo

Creation of skylights, obtained by means of the lateral overlapping of translucent elements combined with curved insulated metal panels.

Tabella Sviluppo R.3.300mm
Span	Rise	Development
1.000	38	1.016
1.200	55	1.221
1.400	75	1.428
1.600	98	1.636
1.600	98	1.636
1.800	125	1.845
2.000	155	2.057
2.200	189	2.270
2.400	226	2.486
2.600	267	2.486
2.800	312	2.927
3.000	361	3.152
3.200	414	3.381
3.400	472	3.615
3.600	534	3.854
3.800	602	4.098
4.000	675	4.349
4.200	754	4.608
4.400	840	4.875
4.600	934	5.151
4.800	1.035	5.440

Tabella Sviluppo R.6.000mm
Span	Rise	Development
1.000	21	1.008
1.200	30	1.210
1.400	41	1.413
1.600	54	1.615
1.800	68	1.819
2.000	84	2.023
2.200	102	2.227
2.400	121	2.432
2.600	143	2.638
2.800	166	2.845
3.000	191	3.052
3.200	217	3.261
3..400	246	3.470
3.600	276	3.681
3.800	309	3.892
4.000	343	4.105
4.200	380	4.319
4.400	418	4.535
4.600	548	4.752
4.800	501	4.971

Svluppo Massimo
Radius	3.300mm
Development	5.000

Sviluppo Massimo
Radius	6.000mm
Development	5.800

FLAT CONTINUOUS ROOFING - arcoPlus®1000 curvo

Creation of continuous roofing, obtained by means of the continuous lateral overlapping of polycarbonate panels. The elements are produced with bending radius R.3,300mm or R.6,000mm.